Categories
- Refrigeration Parts General
- Uncategorized
- A-Z Cooking Parts
- A-Z Food Preperation Parts
Accessories- electrical
- Gas
Hoodies- Kitchen Accessories
Tshirts- Zsupco
LEAK LOCK 1-1/3 oz TUBE
$2.25
HS10001 1-1/3 oz TUBE
Leak Lock
A resin based soft setting brushable paste pipe joint compound
resistant to all refrigerants, oils, water and most chemicals, liquids and gases.
• Use with pressures to 10,000 PSI to full vacuums.
• Temperature range -200°F (-93°C) to 400°F (204°C).
• It never hardens and it never becomes brittle.
• Ideal for joining all metals, plastics and other materials.
• Will stick to all clean surfaces.
• Prevent vibration from loosening nuts, bolts, plugs and fittings.
• Non Toxic
• GUARANTEES A PERFECT SEAL… UNDER ALL CONDITIONS
HS10001 1-1/3 oz TUBE
Leak Lock
A resin based soft setting brushable paste pipe joint compound
resistant to all refrigerants, oils, water and most chemicals, liquids and gases.
• Use with pressures to 10,000 PSI to full vacuums.
• Temperature range -200°F (-93°C) to 400°F (204°C).
• It never hardens and it never becomes brittle.
• Ideal for joining all metals, plastics and other materials.
• Will stick to all clean surfaces.
• Prevent vibration from loosening nuts, bolts, plugs and fittings.
• Non Toxic
• GUARANTEES A PERFECT SEAL… UNDER ALL CONDITIONS
| Weight | 0.226796185 kg |
|---|
Related products
- CHEMICALS
LUBRICATING OIL
$1.26
Add to cartZoom Spout® Oiler
A paraffin base, non-gumming, high quality lubricating oil
• All-Purpose Lubricating Oil
• Flexible spout extends and retracts, adjusts to any “in-between” length
• Withstands high temperatures without breaking down
• Viscosity 92-99 @ 140°F
• Counter Display CaseApplications
• All types of motors, blowers, oil burner bearings, linkages, appliance pumps, etc…
• Normal and High speed shaft bearings - CHEMICALS
TAN EPOXY PUTTY 4″
$8.97Add to cartEpoxi Putty
9900H Tan Epoxy Putty 4 inch blocks
• Cures Wet or Dry – will cure underwater
• Mixes like clay hardens like steel
• After curing, can be sanded, drilled, tapped, machined, sawn, or painted.
• Initial set in 10 to 15 minutes, hard set 1 hour, with full cure in 24 hours.
• Temperature range -65 F to +250 F
• Works on glass, wood, plastic, fiberglass, tile, concrete, and many more. - CHEMICALS
COIL TAMER – HD JET FOAMER
$7.77Add to cartHD Jet Foamer Coil Cleaner
HS59520 19 oz Aerosol Can
Heavy Duty Foaming Coil Cleaner in an aerosol can
• Convenient
• Pleasant Scent
• Environmentally Friendly
• No Ozone Depleaters
• 360
• No Chlorinated Solvents
• Easy to Store
• Water Based
• Nonflammable
• Corrosion Inhibitors
• Spray NozzleQuickly and Easily Liquifies:
• Dirt
• Grease
• Oil • Residues
• Deposits
Use On:
• Evaporator Coils
• Condenser Coils
Will Not Harm Plastics, Metals or Surrounding Equipment
Reviews
There are no reviews yet.